Spare Parts - Burkert 0283 Manuel D'utilisation

The solenoid valve Type 0293 is DVGW certified. Only
Bürkert may carry out repairs.
Malfunctions
If malfunctions occur, check whether:
• the device has been installed according to the instructions,
• the connections are correct,
• the device is not damaged,
• all screws have been tightened,
• the voltage and pressure have been switched on,
• the pipelines are clean.
If the magnet does not pick up, ensure that:
• there is no short-circuit or coil interruption,
• the core / core area is not dirty.
If the valve still does not switch, please contact your Bürkert
Service.
10
english
7

SPARE PARTS

CAUTION!
Risk of injury and/or damage by the use of incorrect parts.
Incorrect accessories and unsuitable spare parts may cause injuries
and damage the device and the surrounding area.
▶ Use only original accessories and original spare parts from Bürkert.
The solenoid valve Type 0293 is DVGW certified. Only
Bürkert may carry out repairs.
The following spare parts or spare parts sets are available for the
solenoid valve Type 0283:
• Coil
• Housing
• Seal set SET 2
• Wear parts set SET 3
When placing an order, specify the spare part as well as the order
number of your device (see rating plate).