Intended Use - Burkert 0283 Manuel D'utilisation

2

INTENDED USE

The solenoid valve Type 0283 and Type 0293 is designed for
dosing, blocking, filling and aerating media.
Type 0293 is classified in accordance with DIN EN 161
Group 2, Class B for gas.
▶ Use according to the permitted data, operating conditions and
conditions of use specified in the contract documents and oper-
ating instructions. These are described in the chapter entitled
"Technical Data".
▶ Provided the cable plug is connected and installed correctly, e.g.
Bürkert Type 2508 (the supplied device socket must be used
for Type 0293), the device satisfies degree of protection IP65 in
accordance with DIN EN 60529 / IEC 60529.
▶ Do not physically stress the device (e.g. by placing objects on it,
using it as a screwing aid, standing on it or using it as a lever arm).
▶ The device may be used only in conjunction with third-party
devices and components recommended and authorised by
Bürkert.
▶ Use device only when in perfect condition and always ensure proper
storage, transportation, installation and operation.
▶ Use the device only as intended.
2.1 Restrictions
If exporting the device, observe any existing restrictions.
2.2 Definitions of terms
The term "device" always refers to the solenoid valve Type 0283 or
Type 0293.
english
3