PTB 03 ATEX 1030 X
Maintenance,Repair,Troubleshooting
9.
mainTenance, repair,
TrOubleshOOTing
9.1. maintenance and repair
DanGEr!
danger due to improper maintenance, repair and inspection
work!
• The maintenance and inspection work on the device may be carried
out by authorized technicians only and with the appropriate tools!
• repairs on the device may only be carried out by the
manufacturer!
• When performing repair or maintenance work on the system, the
valve may not be opened and the protective-conductor connection
may not be disconnected!
9.2. Troubleshooting
In the event of faults, make sure that:
• the device has been installed according to the specifications,
• the connection has been established properly,
• the device is not damaged,
• all screws have been tightened,
• the voltage and pressure have been switched on,
• the pipelines are free.
10. accessOries
CautIon!
risk of injury and / or damage by the use of incorrect parts!
Incorrect accessories and unsuitable parts may cause injuries and
damage the device and the surrounding area.
• Use only original accessories and original spare supplied by
Bürkert.
10.1. spare parts
For electromagnet models with terminal boxes, fuses of the Type 1058
with approval PTB 01 ATEX 2064 U can be used in Temperature
Class T4.
fuse
Type 1058
0.063 A
0.080 A
0.100 A
0.125 A
0.160 A
0.200 A
0.315 A
0.400 A
0.500 A
0.630 A
0.800 A
english
Order
no.
153717
153745
153718
153719
153720
153731
153733
153734
153735
153736
153737
15