Spare Parts - Burkert 2301 Element Manuel D'instructions

1 SYMBOLS
→
designates a procedure which you must carry out.
Warning of injuries:
DANGER!
Immediate danger! Serious or fatal injuries.
WARNING!
Possible danger! Serious or fatal injuries.
CAUTION!
Danger! Moderate or minor injuries.
Warning of damage:
NOTE!
2

SPARE PARTS

CAUTION!
Risk of injury and/or damage by the use of incorrect parts!
Incorrect accessories and unsuitable spare parts may cause injuries and damage
the device and the surrounding area.
▶ Use original accessories and original spare parts from Bürkert only.
2
english
WARNING!
Unsuitable lubricant may contaminate the medium.
In oxygen applications there is a risk of explosion.
▶ Only use approved lubricants for specific applications, such as oxygen or
analytical applications.
The following replacement part sets are available for the globe control valve
Type 2301:
• Seal set for packing gland, consisting of individual parts of the packing
gland, graphite seal and lubricant
• Spindle guide for packing gland, consisting of VA spindle guide, graphite
seal and lubricant
The following replacement part sets are available for the Type 2712 and 2301:
• Control cone set, consisting of control cone, graphite seal, dowel pin and
lubricant
• Valve seat set, consisting of valve seat, graphite seal and O-ring (depending
on the version)
Installation wrench or modified socket wrench are not included in the
spare part sets. They are available from your Bürkert sales office (see
Chapter "4", page 10).