Technical Data - Mesto Maxima 3238 Mode D'emploi

GB IRL

Technical Data

Sprayer Family
Model
Total volume
Max. operating pressure
Max. operating temperature
Empty weight
Tank material
Carrying method
Residue left when empty
Recoil force
Tabel 1
Initial Assembly
Assembly Instructions, see page 3.
Checks
Visual inspection: Check that tank [1], pump, hose [2], shut-off valve [3], piston pressure
gauge and spray wand with nozzle [5] are undamaged.
No leaks: Pump up the empty device to 2 bar
Function: Pull up the piston pressure gauge.
activate the shut-off valve [3].
Have damaged parts or parts that do not work properly repaired immediately by
our customer service department or by service partners authorized by us.
Preparation
Observe the instructions in the section entitled „Safety".
The device must be in an upright position.
into the tank.
• Now remove the screw cap from the tank
AUS USA
3238
5 l
7.3 l
3 bar 43 psi
30 °C
4 kg
Side
0.03 l
4,5
< 5 N
14
NZ CDN
MAXIMA
3 bar 43 psi
Polyethylene
and place the cap into the holding slot
IND
3238 F
5 l
7.3 l
30 °C
4.5 kg
Backpack
0.03 l
4,5
< 5 N