Télécharger Imprimer la page

Vorbereitung Des Mähwerkes Für Arbeits- Und Transportstellung; Preparing The Mower For Work And Transport Position - SIP SILVERCUT DISC 270 F ALP Mode D'emploi

Publicité

3.
Vorbereitung des Mähwerkes
für
Transportstellung
Bei Vorbereitung der Maschine für
Transport-
unbedingt die Gelenkwelle ausschalten.
Motor abstellen und Zündschlüssel
abziehen.
Traktor
sichern!
Beim
Befahren
Strassen darauf achten, dass Sie den
vorgeschriebenen Schutz benutzen.
Bild - Figure 17
2
1
Mähwerk in Transportstellung:
Hebel (1) gegen Aufhängung bewegen und
Seitenschutz (2) aufheben, der arretiert sich
automatisch in Transportstellung.
Das
Mähwerk
aufheben.
Mähwerk von Transport- zur Arbeitsstellung:
Das Mähwerk mit Traktorhydraulik auf
Boden absenken
Hebel (1) gegen Aufhängung bewegen und
Seitenschutz (2) absenken, der arretiert
sich automatisch in Arbeitsstellung.
85
Arbeits-
und
und
Arbeitsstellung
gegen
Wegrollen
von
öffentlichen
mit
Traktorhydraulik
3.
Preparing the mower for work
and transport position
When
preparing
transport and work position always
switch off the P.T.O.shaft. Switch off the
engine and pull out the ignition key.
Secure tractor against movements.
When driving on public roads use the
protections according to regulations.
Bild - Figure 18
The mower in transport position:
Move the lever (1) to the hitch and lift the
side protection (2), it automatically gets
stuck in transport position.
Lift the mower with tractor's hydraulics.
The mower from transport to work position:
Lower the mower on the ground with
tractor's hydraulics.
Move the lever (1) to the hitch and lower the
side protection (2), it automatically gets
stuck in work position.
the
machine
for
1
2

Publicité

loading