Disassembly; 11.1 Safety Instructions; 11.2 Removing The Device; Transport, Storage, Packaging - Burkert 8835 Manuel D'utilisation

Disassembly

11 DISASSEMBLY

11.1 Safety instructions

DANGER!
Danger – high pressure!
Scalding caused by discharge of hot medium.
▶ Before loosening lines or valves, leave the device to cool down,
turn off the pressure and drain the lines.
Risk of electric shock.
▶ Before reaching into the device or the equipment, switch off the
power supply and secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations
for electrical equipment.
Risk of burns/risk of fire due to hot device surface and hot
lines.
▶ Keep the device away from highly flammable substances and
media and do not touch with bare hands.

11.2 Removing the device

WARNING!
Risk of injury from improper disassembly.
▶ Removal may only be carried out by authorized technicians and
with the appropriate tools.
Type 8835
Please note "11.1 Safety instructions"!
→
Loosen pneumatic connection on the pressure controller.
→
Loosen the electrical connection.
→
Loosen medium connections.
→
Remove device.
12 TRANSPORT, STORAGE,
PACKAGING
NOTE!
Transport damage.
Inadequately protected devices may be damaged during
transportation.
▶ Protect the device against moisture and dirt in shock-resistant
packaging during transportation.
▶ Prevent the temperature from exceeding or dropping below the
permitted storage temperature.
▶ Protect the electrical interfaces of the coil and the pneumatic
connections from damage by placing protective caps on them.
Incorrect storage may damage the device.
▶ Store the device in a dry and dust-free location.
▶ Storage temperature: –40 °C ... +55 °C.
Damage to the environment caused by device components
contaminated with media.
▶ Dispose of the device and packaging in an environmentally
friendly manner.
▶ Observe applicable disposal and environmental regulations.
english
21