General Information; Warranty Conditions; Information On The Internet; Description - Burkert S039 Manuel D'utilisation

note
the fitting may be damaged by the fluid in contact
with.
• Systematically check the chemical compatibility of the
component materials of the fitting and the fluids likely
to come into contact with it (for example: alcohols,
strong or concentrated acids, aldehydes, alkaline
compounds, esters, aliphatic compounds, ketones,
halogenated aromatics or hydrocarbons, oxidants and
chlorinated agents).
English
8
5.

deScripTion

The S039 fitting is intended to measure the flow rate of clean
fluids in DN6 to DN50 pipes thanks to its paddle-wheel. Its
combination with an SE39 electronic module builds an 8039
threshold detector.
The fluid flowing in the piping makes the paddle-wheel turn.
The paddle-wheel rotational frequency f is proportional to
the flow rate.
The electronic device can be removed without opening the
piping or stopping the process.
Order codes of the fittings S039:
DN Connections
06 External G 1/4''
threads
G 1/2''
metric, 16 x 1,5
08 External G 1/2''
threads
NPT 1/2''
15 Internal G 1/2''
threads
NPT 1/2''
20 Internal G 3/4''
threads
NPT 3/4''
25 Internal G 1''
threads
NPT 1''
English
10
Order code
552558
552525
552414
444670
444671
440645
444672
440646
444673
440647
444674
4.

GenerAl informATion

To contact the manufacturer of the device use following
address:
Bürkert SAS
Rue du Giessen
BP 21
F-67220 TRIEMBACH-AU-VAL
The addresses of our international branches can be found
on the Internet at: www.burkert.com

Warranty conditions

The condition governing the legal warranty is the conforming
use of the S039 in observance of the operating conditions
specified in this manual.

information on the internet

You can find the user manuals and technical data sheets
regarding the type S039 at:
32 Internal G 1 1/4''
threads
NPT 1 1/4''
40 Internal G 1 1/2''
threads
NPT 1 1/2''
50 Internal G 2''
threads
NPT 2''
6.

TechnicAl dATA

conditions of use
The fluid temperatures and pressures may be
restricted by the electronic device mounted on the
fitting: refer to the relevant manual.
Ambient temperature Depends on the associated electronic
module. Refer to the instruction manual
of the 8039.
Pressure class PN10; The fluid pressure may be
restrictec by the fluid temperature,
see Fig. 1.
Fluid temperature -15 °C to +100 °C
www.burkert.com
English
440648
444675
440649
444676
440650
444677
English
9 9
11 11