What To Do If - Multiplex SMART SX FLEXX Notice D'utilisation

9
Page 80

What to do if?

The transmitter does not switch on.
Cause
Batteries / rechargeable batteries are
empty.
The required distance is not bridged in the range check.
Cause
Possibly, the position of the receiver
aerial is not optimal.
The model cannot be steered.
Cause
The receiver is not bound.
Batteries / rechargeable batteries are
empty.
The binding cannot be performed.
Cause
There is too much distance between
transmitter and receiver.
Solution
Insert new batteries or charge the
rechargeable battery, see section 3.2
"Inserting batteries / rechargeable
batteries" on page 56.
Solution
Increase the distance of the receiver
aerial from electrically conducting
components.
Solution
Perform the binding, see section 3.4
"Binding" on page 57.
Insert new batteries or charge the
rechargeable battery, see section 3.2
"Inserting batteries / rechargeable
batteries" on page 56.
Solution
Reduce the distance to 20 cm or less.
SMART SX FLEXX
What to do if?