Multiplex SMART SX FLEXX Notice D'utilisation page 86

Appendix
SMART SX FLEXX
channel can be configured separately for each output

Voltage up to 12 volts (3S LiPo) / max. 3 amps per output

serial servo signal MULTIPLEX SRXL: requires only
1 connecting cable to the receiver!

For more switching functions, any number of units can be
connected in series
RX4/9 FLEXX M-LINK ID receiver
# 55837

4 servo sockets

9 servo channels as serial servo signal MULTIPLEX
SRXL (e.g. for up to 3 MULTIswitch FLEXX)

Configurable SMART ID
RX4/16 FLEXX M-LINK ID receiver
# 55838

4 servo sockets

16 servo channels via serial servo signal MULTIPLEX
SRXL (e.g. for up to 5 MULTIswitch FLEXX)

Configurable SMART ID
Decal sheet for SMART SX FLEXX
# 724400 truck
# 724401 tank
#724402 universal, for self-labelling
Rechargeable battery for functional models (e.g. Tamiya
truck / tank)
# 157390

2S LiPo in plastic housing, 3200 mAh

Dimensions: 135 x 45 x 24 mm (design identical to the
previous 6-cell rechargeable NiCD or NiMH batteries)

Tamiya connector
Page 85