Introduction; Smart Sx Flexx Concept - Multiplex SMART SX FLEXX Notice D'utilisation

1
1.1
Page 46

Introduction

We are pleased that you have decided to purchase the SMART SX FLEXX radio
control.
You have chosen the perfect system for getting started in the hobby of radio-
controlled model building. We wish you a lot of fun and success with your new
system.
Prior to initial setup, please read these operating instructions and observe all safety
instructions.
The designations MFC-01 and MF-07 used in these instructions are product names
of Tamiya.

SMART SX FLEXX concept

The SMART SX FLEXX entry-level radio control is a compact and intelligent
9-channel radio control system for model vehicles (land/water).

The radio control is optimised for the operation of model trucks and tanks by
Tamiya, but can also be used universally for all other types of functional
models.

The radio control recognises the respective model via the M-LINK ID receivers
and automatically activates the corresponding setting. 50 independent memory
cells are available.

The special functions of Tamiya multi-function units (e.g. MFC-01) are
accessed by simply pressing the corresponding buttons. It is not necessary to
use any combinations of stick position and trim slider as is the case in
analogue transmitters.

The radio control is fully compatible with all other M-LINK ID receivers;
SMART SX FLEXX can be used to operate all M-LINK ID receivers without
any restrictions.

The transmitter is equipped with the new, patented IOAT aerial technology.

A buzzer provides different acoustic signals to alert the user of the most basic
operations such as ID receiver recognition, voltage monitor and trim function.

The transmitter is characterised by an extremely long operating time of up to
25 hours when using the recommended three type AA batteries. A voltage
monitor with a preset warning threshold is incorporated.
Introduction
SMART SX FLEXX