Multiplex SMART SX FLEXX Notice D'utilisation page 69

Page 68
3
Move the left vertical rocker switch to
centre position. (3-speed gearbox)
An acoustic signal indicates that centre
position has been assumed.
4
Start programming mode on the MFC-01 (see operating instructions for
Tamiya MFC-01).
5
Teaching the actuator:
Hold the actuators in the end positions for 2 seconds each.
(a) Left stick: forwards
(b) Left stick: backwards
(c) Left vertical rocker switch (gearbox):

press forwards and hold

press backwards and hold

return to the centre position by
briefly pressing the rocker switch
(An acoustic signal indicates that
centre position has been
assumed.)
Tamiya model trucks
SMART SX FLEXX