Multiplex SMART SX FLEXX Notice D'utilisation page 51

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Safety instructions
Do not modify the radio control system under any circumstances. Use only original
accessory and spare parts.
If the device is operated in combination with third-party products, ascertain their
quality and functional reliability. Each new or changed combination must undergo
careful functional testing, including a range check. Do not operate the device or
model if there appear to be any problems. First identify the error and troubleshoot it.
In particular, have the radio control transmitter and the receiver inspected at an
authorised MULTIPLEX Service Centre (see section 1.2 "Contact" on page 47) at
regular intervals (every 2 to 3 years).
Operate the transmitter only in the permissible temperature range (see section 10.1
"Specifications" on page 83). Bear in mind that condensation may form in the
transmitter due to sudden temperature changes (e.g. warm car, cold environment).
Moisture impairs the function of the transmitter and also of other electronic devices.
If moisture accumulates in electrical devices, immediately stop using the device,
disconnect it from the power supply and allow it to dry in open state as far as
possible (up to a few days). Thereafter, perform a careful functional test. In case of
major condensation, have the device inspected at an authorised MULTIPLEX
Service Centre (see section 1.2 "Contact" on page 47).
Observe a minimum distance of 2 metres from mobile telephones!
A minimum safety distance of 2 m from mobile telephones must be observed while
the device is in operation. Otherwise the high transmitting power of mobile
telephones may result in transmitter malfunctions.
In general, we recommend that you switch off mobile telephones and other devices
which might disturb your concentration while operating models.
Operation of the radio control system is allowed without restrictions within EU
territory.
Check all functions carefully. First familiarize yourself with the operation of the
transmitter before putting the model in operation.
Page 50
SMART SX FLEXX

Publicité

Table des Matières
loading

Table des Matières