Enphase Energy Envoy Manuel D'installation page 41

NOTE: The Priority Duration option should only be used in limited situations,
e.g., at large sites or sites experiencing problems discovering devices with
the normal scan.
5. Click Start Scan to complete this task. The LCD panel will read:
NOTE: No power production data will be collected or displayed on the Envoy
or in Enlighten while Priority Scan is active. Also, the Communication Check
function will not operate during this period.
37
Priority Scan
Is Active
Copyright  2011 Enphase Energy
e
n
g
l
i
s
h
141-00014 Rev 02