Select Language; Check The Envoy's Progress - Enphase Energy Envoy Manuel D'installation

d . Plug the other bridge
into a wall-socket
near your broadband
router.
e . Connect one end of a
second Ethernet
cable into that
second bridge.
f . Connect the other
end of that Ethernet
cable into the
broadband router.
g . Reapply power to the
Envoy to force it to
refresh its IP
address.

7. Select Language

After the Envoy starts up it will request that you set the Language.
a . The Envoy LCD panel will scroll through the available language settings.
When you see the setting you need, press the Menu button and hold for two
seconds.
English

8. Check the Envoy's Progress

After installing your Envoy, it will automatically perform a Communication Check as
described on page 20.
a . Watch the LCD display for progress, noting the number of bars shown in the
communication check.
b . See page 20 for more information on running a Communication Check.
c . Refer to Initial Screen Displays on page 16 for more information.
10
Français
Deutsch
Italiano
Copyright  2011 Enphase Energy 141-00014 Rev 02