Enphase Energy Envoy Manuel D'installation page 22

• Local IP address, for example: 192.168.2.140 (your actual local IP address
will be different). The Envoy will attempt to get a dynamically assigned DHCP
(Dynamic Host Configuration Protocol) IP address during power up sequence.
The Envoy uses the DHCP IP address as a path to the Internet. If
169.254.120.1 is shown, the Envoy has not yet acquired a dynamic IP; Refer
to Troubleshooting on page 27, if this address continues to display.
• Web connection indication: +Web. The web status indicates whether the
Envoy is connected to Enlighten.
•
Indication of the present power-production, in watts: (n)W (where n is a
number)
• Indication of the life time kilowatt hours reported to this Envoy: (n)kWh
(where n is a number)
• Indication of the number of online microinverters producing power and
reporting in to the Envoy: (n) (where n is a number). The number of
microinverters displayed will be zero at night.
After the Envoy establishes an IP address and the web connection, the Envoy
periodically contacts an NTP (Network Time Protocol) server so that it can maintain
an accurate local time.
18 Copyright  2011 Enphase Energy 141-00014 Rev 02