Envoy Installation; Preparation; Installation Flow - Enphase Energy Envoy Manuel D'installation

Envoy Installation

Preparation

Before installing the Envoy, make sure that the site meets the following minimum
requirements:
• Standard AC electrical outlet is available
Tools Required:
• Laptop or other computer for Envoy set up
• Two #8 (4.166 mm or 0.164 inch diameter) screws and a screwdriver for
wall-mounting the Envoy (optional)
If you plan to use Enlighten web-based monitoring and analysis, additional
requirements include:
• Always-on broadband Internet connection
• Broadband router with spare Ethernet port.
• Up-to-date web browser to view Enlighten. Supported browsers are Internet
Explorer 8 or higher, Firefox 3.6 or higher, Chrome 5 or higher, and Safari 4
or higher. Enlighten requires Adobe Flash Player 10 or higher.
Check the Envoy shipping box for the following items:
• Envoy Communications Gateway
• Ethernet cable
• AC power cord
• Power line communication bridges
• Envoy Installation and Operation Manual
• Read This First document

Installation Flow

7 Copyright  2011 Enphase Energy
e
n
g
l
i
s
h
141-00014 Rev 02