Enabling A Connection To Enphase; Disabling A Connection To Enphase; Selecting A New Locale - Enphase Energy Envoy Manuel D'installation

Enabling a Connection to Enphase

The Enable Connection to Enphase menu item creates a secure connection to
Enphase allowing Enphase personnel to troubleshoot the system remotely.
The LCD screen now reads:
Once the connection is open, the LCD will return to the default display.

Disabling a Connection to Enphase

The Disable Connection to Enphase menu item closes the secure connection to
Enphase.
The LCD screen now reads:
Once the connection is closed, the LCD will return to the default display.

Selecting a New Locale

If you move the Envoy to a different location, you may need to select a new Locale
for the Envoy. To do this:
1. Press and hold the Envoy Menu button; after two seconds you will enter the
Envoy menu.
2. Continue holding the Menu button; when the LCD screen displays "Select
New Locale", release the Menu button.
24
Enable Connection
To Enphase
Enabling Connection
Disable Connection
To Enphase
Disabling Connection
Select New Locale
Copyright  2011 Enphase Energy 141-00014 Rev 02