Administration Screen; Administration Screen Tasks - Enphase Energy Envoy Manuel D'installation

Administration Screen

The Administration screen of the Envoy local interface contains a number of
configurable options. Click Administration to access this menu.
The default login credentials for the Administration menu are:
Username: admin
Password: admin
NOTE: For Envoy performance reasons, Enphase does not recommend giving
the Envoy a publicly accessible IP address. However, if you must place the
Envoy on a public-facing IP address, Enphase recommends that you change
the admin password to disallow unauthorized modification to your Envoy.
(This situation is rare, since consumer-grade routers normally
provide the Envoy with an internal network IP address that is not
publicly accessible.)
For reference, private/internal IP address space will be in the 192.168.x.x,
172.16(-31).x.x, 10.x.x.x or 169.254.x.x range. If you are unsure if your
Envoy is on the public Internet, please see your network administrator or
Internet Service Provider.

Administration Screen Tasks

Several Administration Screen tasks are described in the following sections. Perform
these tasks only when needed. Administration tasks include:
•
Change the Grid Profile
• Set Device Scan Control
• Set Time Zone
31 Copyright  2011 Enphase Energy
e
n
g
l
i
s
h
141-00014 Rev 02