Using Enlighten To Check Envoy Status - Enphase Energy Envoy Manuel D'installation

Using Enlighten to Check Envoy Status

To check status of Enphase equipment, do the following:
1. Log on to Enlighten to view the array. Click Inverters.
A list of equipment appears that including the Envoy(s) all of the
microinverters that the Envoy has detected. The column on the far right lists
the status of each microinverter.
2. To view status information for the Envoy, click the Envoy serial number.
3. From here you can choose to Check Signal Strength or Rescan for
Devices as needed.
26 Copyright  2011 Enphase Energy
Click here
to Check
Signal
Click here
to Rescan
141-00014 Rev 02