Technical Data - Virax VULCA P250 B PRO CNC Manuel D'utilisation

14 Maintain your tools with care. For better and safer work, keep cutting tools sharp and clean. Follow the
instructions for lubrication and changing tools. Regularly inspect the electric tool's connection cable, and if it is
damaged, have it replaced by an authorized expert. Regularly check extension cords, and replace them if they
are damaged. Keep the handles dry, clean and free of oil and grease.
15 Pull the plug from the socket. When not using the electric tool, before maintenance or when changing
tools, such as saw blades, drills and cutting bits.
16 Do not leave any tool keys inserted. Before switching on, check to see that keys and adjustment tools have
been removed.
17 Avoid unintentional activation. When plugging the tool in, make sure that the switch is turned off.
18 Use outdoor extension cords. When outdoors, use only extension cords that are approved and
appropriately marked.
19 Be alert. Pay attention to what you do. Approach your work sensibly. Do not use the electric tool when you
are distracted.
20 Check the electric tool for damage. Before using the electric tool, you must inspect safety equipment or
slightly damaged parts carefully to ensure that they work properly and as intended. Check to see that the
moving parts operate freely and don't stick, and to make sure no parts are damaged. All parts must be mounted
properly and meet all the conditions for ensuring trouble-free operation of the electric tool.
Damaged safety equipment and parts must be properly repaired or replaced by a professional facility, unless
otherwise indicated in the user manual. Damaged switches must be replaced by a customer service facility.
Never use an electric tool whose switch cannot be turned on and off.
21 Caution. Using other insertion tools and accessories may cause injury.
22 Have your tool repaired by an electrical expert. This electric tool meets applicable safety requirements.
Repairs must be made only by an electrical expert using original replacement parts. Otherwise accidents many
occur.

2. Technical data

Basic unit :
Pipe welding range Ø ............................................................90-250 mm
Pipe capacity .........................................................................niveaux de pression et toutes les séries SDR page 2
Cylinder stroke, max .............................................................166 mm
Total cylinder surface ............................................................6,26 cm²
Cynlinder inner diameter ......................................................32 mm
Piston rod diameter ..............................................................25 mm
Main dimensions (LxWxH) ..........................910x520x440 mm
(Tubular frame included)
Weight ...................................................................................65 Kg
Trimmer unit :
Power supply .........................................................................230V - 50/60Hz - 3,5A
Rated power input/output ....................................................750W / 470W
-1
Rotary speed .........................................................................660 min
-1
Idle running speed (milling disc) ...........................................85 min
Protection / Protection class .................................................I / IP20
Noise pressure level L / K ................................................82 dB(A) / 3 dB(A)
pA pA
Sound power level L / K .................................................93 dB(A) / 3 dB(A)
WA WA
Weight ...................................................................................15 Kg
Page 34