Machine And Tool Care; Disposal - Virax VULCA P250 B PRO CNC Manuel D'utilisation

4.1. Machine and tool care

(Follow the maintenance instructions in item 4!)
Sharp and clean tools produce better work results and are safer.
Replace blunt, broken or lost parts immediately. Check whether the accessories are securely connected to the
machine.
Use only original spare parts from the manufacturer for maintenance work. Repairs must be carried out only by
professionally qualified personnel.
Disconnect the machine from the mains when it is not in use, prior to care and maintenance work and before
changing accessory parts.
Prior to reconnection to the mains, it must be ensured that the machine and the accessory tools are switched
off.
When extension cables are used, they must be checked for their safety and operativeness. Only cables approved
for outdoor use must be used.
Tools and machines whose housing or handles, especially those made of plastic, are cracked or warped must not
be used.
Dirt and moisture in such cracks conduct electric current. This can lead to an electric shock if the insulation is
damaged in the tools or in the machine.
Note: Furthermore, we refer to the accident prevention regulations.

5. Disposal

Components of the unit are recyclable material and should be put to recycling. For this purpose registered and
certified recycling companies are available. For an environmental friendly disposal of the non-recyclable parts
(e.g. electronic waste) please contact your local waste disposal authority.
For EU countries only :
Do not dispose of electric tools with domestic waste. In accordance with European Directive
2012/19/EU on waste electrical and electronic equipment and its implementation as national
law, electric tools that are no longer serviceable must be collected separately and utilised for
environmentally compatible recycling.
Page 58