Technical Data; General Safety Warnings For The Tool - Virax Eurostem III Manuel D'utilisation

2 Technical data

Battery voltage ................................................ 18V
Battery capacity (recommendation) ................ ≥ 2.0 Ah
Dimensions (L x W x H, without battery) ........ 370 x 360 x 160 mm
Weight (without battery) .................................. 10,04 kg
Bending capacity .............................................
Hardened and annealed copper pipes EN 1057 thickness 1 to 1,5mm, Locksmith's Pipes: Ø 10 – 35 mm
Steel pipes EN 10255 Light and Medium series: Ø 3/8 – 3/4"
Stainless steel pipes up to 1.2 mm thick, Electro-zinc steel: Ø 10 – 28 mm
Multilayer pipes : Ø 14 – Ø 40 mm
Bending angle . ............................................... 0° - 180°
Noise pressure level (LpA) .............................. 84 dB (A) ¦ KpA 3 dB (A)
Sound power level (LwA) ................................ 91 dB (A) ¦ KwA 3 dB (A)
The noise level during operation can exceed 97 dB (C). Wear hearing protection!
Vibration total value ......................................... ≤ 0,33 m/s
Configuration used for the declaration: loaded tests "bending copper tube Ø35mm", bending machine placed on a standardized table.
Sound pressure measurement according to NF EN ISO 11201 and vibration measurement according to NF EN ISO 20643. These
values can be used to compare one electric tool with another. They can also be used to make an initial estimate of the loading.
The quoted vibration and noise emissions can vary during actual use of the electric power tool dependent on the way in which
the electric power tool is used, in particular what type of workpiece is being processed.
Establish additional safety measures to protect the operator which are based upon an estimate of the vibration loading during the actual
usage conditions (in doing so taking account of parts of the operating cycle, for example times in which the electric power tool is
switched and those in which it is switched on but not running under load).
Voltage ..................................................................................................... 18V ................................................... 18V
Capacity ................................................................................................. 2,0 Ah ............................................... 4,0 Ah
Weight .................................................................................................. 0,400 kg.............................................0,584 kg
Charge current .......................................................................................... 3 A ..................................................... 3 A
Approx. Charging time (90% full) ........................................................... 40 min ............................................... 80 min
Charging voltage .................................................................................. 20,75 DC ........................................... 20,75 DC
Charging temperature .......................................................................... 0° - 50°C ........................................... 0° - 50°C
Max. discharging temperature ............................................................. 5° - 50°C ........................................... 5° - 50°C
Recharge battery pack before first use!
Chargeur ref. 253542
Input voltage ................................................. 220 – 240V
Input frequency ............................................ 50 – 60Hz
Input power ................................................... 85W
Charging voltage .......................................... 14 – 42V
Max. charge current. .................................... 3,0 A DC
Number of battery cells ................................ 4 - 10
Weight .......................................................... 0,6 kg
Pay attention to the electrical outlet voltage!
Check the label on the bottom of the charger!
NOTES:
• Read the instructions carefully before using this tool.
• The manufacturer reserves the right to improve his products and change their specifications without prior notice.
• The specifications can vary according to the country.

3 General safety warnings for the tool

WARNING:
▪ Read all the safety warnings and all the instructions. Failure to follow the warnings and instructions may lead to an electric
shock, a fire and/or a serious injury.
▪ Keep all the warnings and instructions to be able to refer to them later.
• In the warnings, the word "tool" refers to your battery-operated power tool.
3.1 Working zone safety
• Keep the working zone clean and well lit.
• Do not operate electric tools in explosive
atmosperes (flammable liquids, gas or dust).
• Keep children and any people present way from
the working zone.
16
2 2
¦ K= 0,06 m/s
Battery CAS
2,0 Ah Li-Ion Power
Ref. 253540
Poorly lit or untidy zones are sources of accidents.
Electric tools create sparks which may cause dust or smoke to catch fire.
Distractions may cause you to lose control of the tool.
EN
Battery CAS
4,0 Ah Li-Ion HD
Ref. 253541 (optional)