Setting Up Or Selecting Machine Configurations; Error Messages - Virax VULCA P250 B PRO CNC Manuel D'utilisation

Masquer les pouces Voir aussi pour VULCA P250 B PRO CNC:

Table des Matières

Les langues disponibles

3.7. Setting up or selecting machine configurations

To select or set up machine configurations, press the SETTINGS button.

The desired machine configuration can be selected using the arrow keys.

To set up a new configuration, use the right arrow key to start the next number, such as 2.

Pressing on the corresponding display field brings up the entry form. The data can be deleted with DEL and

reentered. These data are later placed into the log.

Touch PC and log

Error message

Code 1

Code 2

Code 4

Code 64

Code 128

Code 256

Code 512

Code 2048

Code 4096

Code 131072

Description

Equalization pressure too high

Equalization pressure too low

Warm-up pressure too high

Changeover time too long

Pressure dissipation time too long

Joining pressure too high

Joining pressure too low

Heating element too cold

Interruption by operator

Heating element too hot

Page 56

Table des Matières

Table des Matières