Welding Process In Premium Mode - Virax VULCA P250 B PRO CNC Manuel D'utilisation

Stay a safe distance away from the machine. Do not stand or reach into the machine. Keep other
people away from the work area.
 Check to see that the welding surfaces are flat, parallel and axially aligned.
Should the joint surfaces show any misalignment, repeat the trimming procedure. For best results the work
piece ends should not be mismatched by more than 10% of the wall thickness and the maximum gap between
the joint surfaces no more than 0.5 mm. This recommendation does not release you from your obligation to
observe national welding guidelines. Clear away any remaining shavings with a clean brush.
CAUTION! Do not touch the trimmed, ready to weld surfaces. Ensure that the surfaces are free of
any and all containments and foreign objects!
3.2.4.1.
Risk of injury! Keep a safe distance from the machine when mechanically closing clamps and
moving work pieces. Keep hands, limbs and objects such as clothing, tools etc. away from running
machine!
The form shows the temperature of the heating plate.
The arrow keys take the program back to "Drag pressure finding".
The arrow keys take the program back to "Please insert the trimmer..."
EXIT takes the program to the main menu without saving.

Welding process in premium mode

Page 49