Virax VULCA P250 B PRO CNC Manuel D'utilisation page 55


 Press Start, Setting and then Control Panel.
The taskbar is hidden and can be called back up by pressing on the
lower left corner
 Click Date/Time.
 Set up the entry form by touching and dragging the date/time bar.
Select the appropriate time zone or enter the current time.
Attention ! Pay attention to AM / PM !
1:58:09 PM = 13:58:09 / 1:58:09 AM = 01:58:09
 Confirm with „Apply" and
„OK". Close the control panel
with X.
 Press the „Start" and „Run" buttons
 On the keyboard that
appears, enter reboot and
press „OK". The PC restarts
Page 55