Setting Of Optional Telephone Art. 2610 - Comelit COLOR DIVA MT KIT 11 Manuel Technique

Setting telephone (optional) Art. 2610
To extend the DIVA KIT system by adding the optional telephone
Art. 2610, the table necessary for defining the required
telephone functions is given below.
DIP 1 DIP 2 DIP3 DIP 4
0 0 0 0
1 0 0 0
0 1 0 0
1 1 0 0
0 0 1 0
1 0 1 0
0 1 1 0
1 1 1 0
0 0 0 1
0 0 1
1
0 0 1
1
1 1 0 1
0 0 1 1
1 0 1 1
0 1 1 1
P2
2
P1 1
3 4
6
5
7 8
9
Button 1 function Button 2 function
Call
Generic actuator
to switchboard
Call Single-residence
to switchboard Inter.
Call
Two-residence Inter.
to switchboard
Single-residence
Generic actuator
Inter.
Generic actuator Two-residence Inter.
Call
Doctor
to switchboard
Doctor Generic actuator
Single-residence
Doctor
Inter.
Doctor Two-residence Inter.
Single-residence
Two-residence Inter.
Inter.
Switchboard call Automatic switch-on
Generic actuator Automatic switch-on
Doctor Automatic switch-on
Single-residence
Automatic switch-on
Inter.
Two-residence Inter. Automatic switch-on
Video request and Automatic Switch-on function
Automatic Switch-on function (recommended only for systems
with 1 or 2 entrances). Press and immediately release the
dedicated pushbutton (pushbutton 2 - if the factory settings
have been kept) to switch on the monitor. Automatic switch-on
is possible only when the system is idle.
Automatic switch-on can be disabled. To disable the function,
keep the dedicated monitor automatic switch-on pushbutton
pressed for more than 6 sec. A single confirmation tone will be
heard in the handset.
To enable the function, keep the same pushbutton pressed for
more than 4 sec. In this case, a double confirmation tone will be
heard in the handset.
2
Video Request on monitor with brackets Art. 4784KC set as
Secondary (see JP1 in figure, in position S).
The Video Request function does not need enabling; it allows a
monitor to be switched on following a call for the user from
the external unit.
Use of Video Request function: press and immediately release
Pushbutton 2 (pay attention to the DIVA KIT mode set by
means of the programming microswitches) to switch on the
monitor.
2
MT KIT
39
MT KIT