Internal Units; Technical Characteristics Colour Monitor Art. 4780 - Comelit COLOR DIVA MT KIT 11 Manuel Technique

GROUP S.P.A.

INTERNAL UNITS

Art. 4780
1
2
4
9
11
3

Technical characteristics Colour monitor Art. 4780

Diva series wall-mounting monitor 260x127x38 mm, with 3.5''
colour screen. The monitor can also be installed on a desktop by
means of special support Art. 4782.
1. Brightness adjustment (turn to vary the intensity).
2. Call volume adjustment (turn to vary the intensity).
3. Door lock release pushbutton
4. Pushbutton for enabling and disabling the intercom after a call
( ) Once enabled (blue LED on) the conversation is in
automatic Speak/Listen mode.
5. Pushbutton available as standard, factory setting for Actuator
function. (A)
6. Pushbutton available as standard, factory setting for Automatic
Switch-on function.(A)
7. Pushbutton available as standard factory setting for Call Porter
Switchboard function. (A) (B)
8. Pushbutton available as standard for Privacy function (factory
setting) / Doctor function. (A)
9. Blue LED indicating speech function (the speech function is
active when the LED is on).
10. Red LED indicating internal extension engaged, Privacy or
Doctor services active, or, during communication, it indicates
the status of the conversation:
off: calls from the external unit or from another intercom
device are heard on this monitor;
on: calls from this monitor are heard on the external unit or on
another intercom device.
11. Hooking brackets.
(A) Standard pushbutton available for different functions as given
on page 36.
(B) Freeable pushbutton
Up to a max. of 3 monitors can be used in the same residence unit.
Clean using a cloth moistened with water. Do not use alcohol
and other aggressive products.
26
MT KIT
11
10
8
7
6
5
.
Art. 4784KC
3
7
9
10
8
Monitor fixing bracket
The fixing bracket Art. 4784KC enables wall-mounting of the
monitor or installation by means of desk base Art. 4782 (for more
information see page 27).
Technical characteristics
1. Monitor-bracket connector.
2. System connection terminals:
+ - Terminals for connection to Art. 1205/B or 1212/B
L L Bus line connection terminals.
CFP CFP Floor door call input.
P3 C3 Contacts for Pushbutton 3 used for various purposes
(see KD/PC variant page 85).
To have a C.NO. contact (24V-100mA max), remove the
jumpers CV3 and CV4.
+S -S Terminals for call repeater device (see SB2/AAK variant
page 83).
+LED -LED Terminals for LED various uses (see KD/NC
variant page 85).
3. JP1 Jumper for programming the bracket as Main or
Secondary (see page 35).
4. S1 User code programming microswitches.
5. S2 Microswitches for various settings.
6. CV3 CV4 Jumper to free Pushbutton 3 (C. NO. contact 24V-
100mA max).
7. CV5 Video closing jumper.
8. TM1 Microphone volume.
9. TM2 Speaker volume.
10. TM3 Microphone sensitivity for switching intercom channels
(factory-set in ideal position).
2
5
6
4
1