Description de la micro-console
Nous décrivons ci-dessous le fonctionnement des touches et de l'affichage de la
micro-console du DCS800.
Status LED:
• Green for normal operation
• Flashing green for alarms
• Red for faults
Soft key 1 - Function varies, and is
defined by the text in the lower-left
corner of the LCD display.
Up –
• Scrolls up through a menu or list
displayed in the middle of the
LCD display.
• Increments a value if a parameter
is selected.
• Increments the reference if the
upper-right corner is highlighted
(in reverse video).
LOC/REM – Changes between local
and remote control of the drive.
STOP – Stops the drive in local
control from DCS800 panel and
when the Start-up Assistant is used.
Caractéristiques générales
Touches multifunction :
La fonction de ces touches est spécifiée dans le texte affiché juste au-dessus.
Contraste de l'afficheur :
Pour régler le contraste de l'afficheur, enfoncez simultanément les touches MENU
et à flèche HAUT ou BAS, jusqu'à obtenir le contraste souhaité.
LCD display – Divided into three main areas:
• Top line variable, depending on the mode of operation.
• Middle area – variable, in general, shows parameter values, menus or
lists.
• Bottom line – shows current function of the two soft keys, and the clock
display, if enabled.
START – Starts the drive in local
control from DCS800 panel and
when the Start-up assistant is used.
3ADW000193R0207 – Manuel d'exploitation DCS800 fr c
Soft key 2 – Function varies, and is
defined by the text in the lower-right
corner of the LCD display.
Down –
• Scrolls down through a menu or list
displayed in the middle of the LCD
Display.
• Decrements a value if a parameter
is selected.
• Decrements the reference if the
upper-right corner is highlighted (in
reverse video).
Help – Displays context sensitive
information when the button is
pressed. The information displayed
describes the item currently
highlighted in the middle area of the
display.
DCS800 FW pan sum.dsf
Micro-console du DCS800
236