Technical Data; Machine Description - Promac 930E Notice Originale

Technical data

Model ................................................................................ 930E
Drilling capacity, steel (mm) ..................................................................... 32
Motor (Volt) ........................................................................................... 400
Motor (kW) ........................................................................................... 0.75
Rotation speeds (rpm) .................................. 105 - 2650 (2-speed motor)
Spindle stroke (mm) ............................................................................. 125
Spindle cone (MT) .................................................................................... 3
Spindle diameter (mm) ............................................................................ 62
Column diameter (mm) .......................................................................... 92
Table size (mm) ........................................................................... 390 x 290
T-slot width (mm) .................................................................................... 12
Overall dimensions (max - H x W xDT, in mm) ............1745 x 450 x 750
Weight (kg) ........................................................................................... 216

Machine description

With the PROMAC drilling machines, you have universal machining centres at your disposal enabling to carry out the most
varied machining operations. Safe working operation and high working accuracy are guaranteed for many years, as long
as the machine is correctly used and maintained. The machine should be put into operation only after having carefully read
and understood these operating instructions, and only if all the operations involved in its correct use are safely understood
and mastered.
To do this, the different functions should be discovered without starting the machine.
Features
1. The design of this machine enables drilling with the most various tools. The machine is equipped with
stepped pulleys and with belts for changing the spindle speed.
2. The machine is precision engineered and easy to operate, and provides therefore experienced operators
no limits to its use.
3. The drilling process can be done with the following method: Direct manual control of the spindle stroke
movement (up movement) for the drilling process.
4. The large dimensioned column gives the machine a high rigidity to prevent any distortion and ensures high
accuracy.
5. The machine head is made of solid grey cast iron, and ensures that the accuracy, which is given by
precision drilling operations, is maintained.
Handling procedure
To move the drill press, please follow the scheme on the right showing how the machine
should be gripped to avoid tipping over.
23