Mettler Toledo IND560 PDX Guide D'installation page 60

IND560 PDX Installation Manual
The connection should be wired as shown in Figure 2-48.
The part number for the Remote IO cable is Belden 9463. It is sometimes referred
to as "Blue Hose" cable.
DeviceNet
The DeviceNet option board (Figure 2-49) is connected to the network by a
DeviceNet-specific twisted pair cable.
Figure 2-50 indicates the pin numbering of the DeviceNet Option Board connector.,
Wire colors and functions are detailed in Figure 2-51.
2-30
NOTES:
1. CONNECTION WITH TWIN AXIAL CABLE (BLUE HOSE) SHOWN.
2. REFER TO ALLEN-BRADLEY REMOTE I/O DOCUMENTATION FOR TERMINATION
RESISTOR AND OTHER CONSIDERATIONS.
3. WIRE SIZE: 14 AWG (2.088 mm2) MAXIMUM
22 AWG (0.322 mm2) MINIMUM.
Figure 2-48: RIO Connection
Figure 2-49: DeviceNet Option Board
1 2 3 4 5
Figure 2-50: DeviceNet Option Board Connector Pin Numbering