Differences From The Standard Ind560 - Mettler Toledo IND560 PDX Guide D'installation

• Grand total and subtotal registers for accumulating weight
• Support of the following Application Software Modules:
- Fill-560
- Drive-560
- COM-560
• Support for TaskExpert™ custom application development software
For information about IND560 PDX terminal operation and how to use these
features, please refer to the IND560 PDX User Guide.

Differences from the Standard IND560

There are several differences between the IND560 PDX and the standard IND560 in
addition to the type of scale that it supports. For clarity, these differences have been
listed below:
Table 1-1: IND560 PDX Differences
Feature
Number of serial ports
standard
Optional serial ports
Support of USB
Only in version 4.00 and higher
Voltage source available
COM3 provides full-
duplex 4 wire RS-422 using the Ethernet/COM2/COM3
COM4 Available
IND560 PDX Installation Manual
Standard IND560
1
2 – by using the
Ethernet/COM2/COM3
1 – when using the new
Ethernet/COM3/USB Option in
version(s) 4.00 and higher
Yes – by using the new
Ethernet/COM3/USB Option
No
Yes – 2 ports available when
Option
No – when using the
Ethernet/COM3/USB Option
No
IND560 PDX
2 – electrically isolated
1 – when using the new
Ethernet/COM3/USB Option
2 – when using the
Ethernet/COM2/COM3
Option
Yes – by using the new
Ethernet/COM3/USB Option
Yes – 24VDC available on an
independent connection
Yes – by using the
Ethernet/COM2/COM3
Option
No – when using the
Ethernet/COM3/USB Option
Yes – standard on the main
board (RS-232 only)
1-3