Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DANGER:
ATTENTION:
3.9. Machine Data and Technical features
3.9.1.
Identification Plate
To identify the machine, a CE identification plate is affixed to it; the identification data reported on this plate must be notified to
the manufacturer's offices on each request for intervention or to order spare parts. Specifically, the identification plate reports the
following data:
1.
code,
2.
registration,
3.
ampere absorption (A),
4.
Watt absorption (W),
5.
refrigerant type,
6.
power voltage (Volt/Ph/Hz),
7.
maximum operating pressure PS HP (high pressure side) – PS LP (low pressure side),
8.
maximum operating temperature TS HP (high pressure side) – TS LP (low pressure side),
9.
overall class according to directive 97/23/ CE (PED).
Registration Identification
1.
figure 1 and 2 = last two figures of year of manufacture,
2.
figure 3 and 4 = week of year in which the machine was manufactured,
3.
figures 5, 6 , 7 and 8 = progressive number.
3.10 Technical Data and Overall Dimensions
The technical features of the machine are found in Chapter 9 – Attachments in this handbook.
C
h
a
p
t
e
r
4
C
h
a
p
t
e
r
4
T
r
a
n
s
p
o
r
t
a
T
r
a
n
s
p
o
r
t
a
4.1. General information
The installation and possible re-installation of the machine must be conducted directly by qualified staff.
Before proceeding to installing the machine, it is necessary to prepare the power supplies and utilities necessary for the correct
functioning of the system, following the indications reported in this chapter and, if necessary, consulting the manufacturer's
Technical Office in advance.
ATTENTION:
DANGER:
4.1.1. Power and Utilities
tampering or unauthorised replacement or one or more parts of the machine and use of accessories,
tools or consumable materials other than those indicated by the manufacturer can generate danger of
injury.
all the materials with environmental impact which must be eliminated after interventions or processes
on the machine must be disposed of according to norms in force. If necessary, entrust specialist
structures to dispose of them.
n
d
I
n
s
t
a
l
l
a
t
i
o
n
d
I
n
s
t
a
l
l
a
t
i
This product as sold complies with the 97/23CE (PED) standard and is marked with the relevant
category. After purchase it is the responsibility of the owner to ensure that this equipment is regularly
maintained continue its compliance up to the stage when it is finally decommissioned according to the
relevant national law.
the manufacturer declines all responsibility for any damage to property and/or persons deriving from
improper interventions conducted by unqualified, untrained or unauthorised staff.
LABEL
n
o
n
UK
P-SF-SV Pag. 45 REV 00 02/11
Publicité
Chapitres
Table des Matières
