EMS AIR-FLOW handy 3.0 PERIO Mode D'emploi page 93

The unit efficiency diminishes
If the handpiece falls
If there is leakage of powder through
the PERIO-FLOW Nozzle
FB-543_HS_rev_A_01_Handy 3 Perio & Handy 3 PLUS.indd 85
• Check the amount of powder in your device
• Check the air pressure of the dental unit
• Change the PERIO-FLOW Nozzle
• Remove the residual powder in the channels of the handpiece with the EasyClean
• Send the unit to an approved Hu-Friedy & EMS repair center
AIR-FLOW PERIO handpiece
• Replace the nozzle and check the fit of the PERIO-FLOW Nozzle
• If the PERIO-FLOW Nozzle doesn't hold or it is not watertight, send the handpiece to a certified Hu-Friedy &
EMS Repair Center
AIR-FLOW PLUS Handpiece
• Check the state of the PERIO-FLOW Nozzle
• Replace the handpiece
• Fill with the Easyfill
• Reduce the volume of powder in the powder chamber
85
3/7/2016 8:09:00 AM