The range hood should provide many years
of trouble free use provided it is properly
maintained. Be sure the lights are cool befo-
re cleaning the hood – they are halogen and
become extremely hot.
Cleaning the Filter.
The aluminium mesh filters should be wa-
shed by hand or in the dishwasher as re-
quired. Damaged and worn filters must be
replaced immediately. (Do not operate blo-
wer when filters have been removed). Allow
filters to dry before replacing them, otherwi-
se water will be drawn into the blower.
If a carbon filter has been fitted, this must be
replaced every 6 months as a minimum, de-
pending on usage and type of cooking that
is performed.
It is suggested that a spare set of carbon
filters is kept on hand. These can be ordered
from the supplier of your range hood.
Cleaning the Hood.
The outside and interior of your hood should
be wiped regularly with a clean, damp cloth
and mild household dish detergent or degre-
aser.
Use a good quality non-abrasive foaming
type stainless steel cleaner for exterior sur-
faces.
Follow the manufacturers directions. Gene-
rally the foam is sprayed onto a clean dry
cloth and then applied to the stainless steel.
Allow the foam to react on the surface for
a few minutes and then wipe with a clean
dry cloth.
M A I N TE N A NCE
10
On the surfaces that are exposed directly to
heat from the cook-top, it is advisable to cle-
an these regularly to avoid the deposits from
becoming baked on.
Do not use abrasive cleaning agents as the-
se will destroy the brushed finish.
Replace the led lamp SUF6
Before replacing the led lamp switch off the
appliance using appropriate tools and then
remove the led lamp from its slot (Fig. 12).
Take out the led lamp from its connector and
replace it with an another one with similar
characteristics.
To find the correct led lamp please check on
the replacement part list.
If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or a similarly qualified person in order
to avoid a hazard.