Maintenance - Sirius SILT26 Instructions D'utilisation Et Avis De Montage

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20

MAINTENANCE

An accurate maintenance guarantees good
functioning and long-lasting performance. *
Particular care is due to the grease filter The
grease filter is fixed through magnets, there-
fore it is sufficient to insert a hand tool or the
tip of a knife in the dedicated opening and
push upwards in order to pull the filter out of
its place. See Fig. 12. In order to remove the
filter from the hood, unhook the two security
cables opening their snap-hooks, The active
coal filter has to be removed after the extrac-
tion of the grease filter by pushing its special
plastic handle. The grease filter can be clea-
ned by hand-washing or in dishwashers..
The active coal filter has to be replaced in re-
lation to its use, at least once every six mon-
ths. To clean the appliance itself tepid wa-
ter and neutral detergent are recommended,
while abrasive products should be avoided.
The power cord must be replaced only by
qualified person.
The LED lamps must be replaced only by qua-
lified person.
18

Publicité

Chapitres

Table des Matières
loading

Table des Matières