All Models; Model Description - Hatco HCWBI Serie Manuel D'installation Et D'utilisation

English

All Models

Hatco Hot/Cold Drop-In Wells are reliable and versatile. Each
unit has an insulated, stainless steel and aluminized steel
housing. For hot operation, an FR2 series Hydro-Heater is
mounted under the well and is designed to heat or hold foods
at safe temperatures between 140ºF and 190ºF (60°C and
88ºC). The Hydro-Heater features a tubular water chamber
with a spiral heating element wrapped around the outside.
They include a stainless steel front, powdercoated body, a
low-water cut-off system, and a convenient 3/4ʺ Garden Hose
Thread (GHT) drain connection. For cold operation, the sides
of the internal well are completely surrounded with a copper
evaporator coil to provide even chilling from top to bottom.
Hatco Hot/Cold Drop-In Wells are designed, manufactured,
and tested to maintain safe food holding temperatures.
Controls for the Hot/Cold Drop-In Wells are housed in a
single, remote-mountable control enclosure. They include
a three position Power I/O/I (on/off/on) Switch, two digital
temperature controllers, and a drain status indicator light. The
control enclosure is connected to the condensing unit with a 4'
(1219 mm) power cord and is connected to the Hydro-Heater
with a 6' (1829 mm) flexible conduit assembly. Hot/Cold Drop-In
Wells are hardwired directly to a power source for a secure and
cord-free serving area.
Form No. HCWBIM-1017
HCWBI-2DA
HCWBI-4DA
All Hot/Cold Drop-In Well models are designed to be mounted
to the topside of various types of countertop material including
stainless steel, wood, Corian, and Swanstone.
Depending on the model's pan capacity, each Hot/Cold Drop-In
Well is supplied from the factory with the proper size Water
Baffle and appropriate number/configuration of Pan Platforms
for hot operation as well as the appropriate number of 20"
(508 mm) Pan Support Bars for cold operation. Each individual
well is capable of holding a variety of pan combinations of full
size, 1/2-size, 1/3-size, and/or 1/6-size pans with additional
accessory Pan Support Bars.
Food Pans, Pan Support Bars, and a flush hose kit are
available as accessories for the Hot/Cold Drop-In Wells. Refer
to the OPTIONS AND ACCESSORIES section in this manual
for details.
HCWBI-6DA
HCWBI Models
5

MODEL DESCRIPTION

HCWBI-3DA
HCWBI-5DA