Plus/Minus Weighing - Soehnle Professional 2790 Mode D'emploi

ENGLISH
Switching on
Only when the scale is not loaded.
After the test routine, the display is set to zero.
The scale is ready for use.
Place the weighing goods on the scale.
The display shows the gross weight.
Setting to zero
Necessary when the display does not show zero,
when unloaded. Possible zero range -1 % ... +3 % of
the weighing range.
Tare weighing
Tare (empty) container.
The scale is ready for net weighing.
Deleting tare weight
The display shows the
gross weight or 0.000 when unloaded

Plus/minus weighing

Place the test weight on the scale. Tare. Place the
item for checking on the scale. Read-off the devia-
tion.
Switch-off
Immediately possible when the display is "0". In other
cases, keep the button pressed for 3 seconds.
Printer/IT
Sends the dataset to the printer or IT equipment.
X 10 resolution
Press and hold down the Print key and then press
and hold down the zero key.
Note
These functions are only executed when the scale is
at a standstill and up to 5 seconds after the key is
pressed.
16