Filter Setting - Soehnle Professional 9241 Mode D'emploi

ENGLISH
16
Setting the I/O port (not available)
Press the key repeatedly until "A2 --" is displayed.
Setting the zero tracking function
Can be set between 0.5d / 1d / 2d / 4d (default).
(can be used for zero offset in heavily fluctuating tempera-
tures)
Increment by pressing
Mass unit switchover
Used to activate the mass unit options available by tog-
gling the key.
The mass unit options can be displayed one after
the other by pressing the
The selected unit can be activated (on) or deactivated
(off) by pressing the
Press the key to display the next option.
Setting the beep tone for check weighing
0 = beeper off
1 = beeper on when OK between LO and HI
2 = beeper on as long as not OK at LO and HI.
Increment by pressing

Filter setting

7.5 measurements / sec = high filter
15 measurements / sec (default)
30 measurements / sec
60 measurements / sec = no filter
Increment by pressing
and confirm by pressing
key.
key.
and confirm by pressing
and confirm by pressing
.
.
.