Intended Use; Safety Instructions - Soehnle Professional 9241 Mode D'emploi

ENGLISH
Thank you for choosing this SOEHNLE PROFESSIONAL product. All the features of this product
were designed to the state of the art and are optimised for simple and straightforward use.
If you have any queries or experience any problems not addressed in the operating instructions, ple-
ase contact your SOEHNLE PROFESSIONAL service partner, or visit us on the Internet at
www.soehnle-professional.com.

Intended use

The SOEHNLE PROFESSIONAL Scale 9241 is designed for weighing products.This scale is inten-
ded for applications not subject to compulsory calibration within the EC. The scale complies with the
type described in the EC Type Approval Certificate as well as the applicable requirements of EC
Directives 89/336/EEC and 73/23/EEC

Safety instructions

Before putting the appliance into use, please read with care the information given in the Operating
Instructions. They contain important instructions for installation, proper use and maintenance of the
appliance.
The manufacturer shall not be liable for damages arising out of failure to heed the following instruc-
tions:
When using electrical components under increased safety requirements, always comply with the
appropriate regulations. Never perform work on the appliance while the power is switched on.
Improper installation will render the warranty null and void. Ensure the voltage marked on the power
supply unit matches your mains power supply.
The device is designed for use within buildings. Observe the permissible ambient temperatures for
use (Technical Information).
The device meets the requirements for electromagnetic compatibility. Do not exceed the maximum
values specified in the applicable standards.
If you have any problems, contact your local SOEHNLE PROFESSIONAL service partner.
Cleaning
It is sufficient to clean the scale with a moist cloth and a regular cleaning agent. Do not use any
scourers.
Maintenance
The scale does not require any routine maintenance. However, we recommend to check the scale's accu-
racy at regular intervals. The regularity of these checks is dependent on the level of use and the state of
the scale. If any inaccuracies occur, please contact your local dealer or SOEHNLE PROFESSIONAL ser-
vice partner.
Note
Interference suppression of the unit corresponds to the valid EU directive 89/336/EEC.
The display value may be influenced by extreme electrostable and electro-magnetic interference, e.g. ope-
ration of a radio unit or a mobile phone in the immediate vicinity of the unit. When the electrostable interfe-
rence is no longer present, the unit can again be used for its intended purpose. You may need to switch it
on again. If there is permanent electrostable interference, we recommend earthing the platform.
The unit is a measuring instrument. Air currents, vibrations, rapid changes in temperature and direct sun-
light may have an effect on the accuracy of the scale.
The scale is protected to IP 54 protection class. Therefore, avoid high levels of humidity, vapours, aggres-
sive liquid media and strong contamination.
10