Weighing And Counting - Soehnle Professional 9221 Mode D'emploi

ENGLISH
Counting scale 9221

4. WEIGHING AND COUNTING

Setting to zero
■
If the display does not read zero when
the scale is not loaded, press
Possible zero range ­2%...+2% of the
weighing range
Tara calculate / deduct
■
Tare weighing
• Place the container on the platform.
• Press
The display is set to zero.
The arrow sign points to
Weighing with manuel input tare
• Enter a known tare weight in kg.
• Press
flashing.
• Place the container on the platform.
• Place the weighing product on the
scale.
After the display stabilizes, the net weight of
the weighing product is displayed. The arrow sign
points to .
Cancelling a tare
Press when unloaded.
Counting
■
If piece weight is unknown
• Place the counted reference quantity
on the platform.
• Enter quantity and press
long as the number is flashing.
20
.
.
.
.
as long as the value is
as
Further quantities of this part can be counted by
placing them on the platform.
If piece weight is known (manual input)
• Enter known piece weight in gram.
• Press
flashing.
Further quantities of this part can be
counted by placing them on the platform.
By small reference quantity or if the reference
weight is too small it will be shown on the display
panel "PIECE WEIGHT".
Nevertheless the counting can be continued.
Setting target weight
■
For weight value or counting value you
can set a upper and lower limit.
• Press
• To switch between counting (Cnt)
and weighing (Net) press
• Press
The display panel "WEIGHT" shows "Hi Cnt" or
"Hi Net" (upper target value).
• Enter quantity or target weight
in gram or delete with
• Press
The display panel "WEIGHT" shows "lo Cnt" or
"lo Net" (lower target value).
• Enter quantity or target weight in
gram or delete with
• Press
and to finish the input.
as long as the number is
.
.
.
.
to take over the value.
.
to take over the value