Care And Cleaning; Disposal - Arjohuntleigh Skin IQ Microclimate Manager Mode D'emploi

Care and Cleaning

During patient use, clean Skin IQ Coverlet by wiping with a mild soap and water solution. Do
not launder the Skin IQ Coverlet. The Skin IQ Coverlet is for single patient use only.
Avoid spilling fluids on any part of the Skin IQ power supply. If spills do occur:
• disconnect the power cord from the wall outlet
• clean fluids from the product
Ensure that there is no moisture in or near the power supply and power
plug before reconnecting the power cord.

Disposal

The coverlet itself is a single patient use only product, but some of the items that come
with it can be reused if they are handled properly when removed. Follow the steps below to
remove the fan and dispose of all components of the Skin IQ
1. Disconnect power cord from wall outlet.
2. Disconnect power supply from fan.
Power supply and cord can be reused. Consider all facility policies and
procedures with regard to cleaning, inspection and reuse of electronic
equipment. If not reused, dispose of power supply per approved local
institutional procedures.
3. Cut fan out of coverlet as shown.
4. Dispose of coverlet and fan according to
approved local institutional procedures.
Fan assembly contains electronic
components that may require alternate
disposal than the soft goods of the coverlet.
Improper disposal of any component may
result in regulatory non-compliance.
8
.
MCM