Free Wheel Function - Numatic HGB 3045 Notice Originale

Machine Operation
To start: hold either trigger and press the Yellow On / Off Switch
once to start the machine.
Direction is controlled using the direction switch fitted to the left
side of the handle

Free Wheel Function

29
www.numatic.co.uk
Note: To drive machine in "Transport Mode" hold down both triggers.
For a speed boost when moving the machine press the grey fast
moving lever down.
The speed is controlled by the speed control knob fitted to the
right hand side of the handle
Anti Crush Switch
This machine is fitted with an Anti Crush Switch, instantly
stopping and moving the machine forward if accidentally reversed
into the operator.
Located on the left side of the machine is the Free Wheel lever.
To disengage the brake / drive mechanism, push the lever down.
This allows the machine to be moved in free wheel mode.
Note: When the machine is in free wheel mode the brake
has been disengaged, avoid slopes.