Hand-Held Vacuum Cleaner; Before Initial Use; Attaching The Wall Bracket With Charging Station - Cleanmaxx 06916 Manuel D'utilisation

Hand-held vacuum cleaner

18
17
16
11 Battery status display
12 On / Off switch
13 Motor unit
14 Battery (removable)

Before Initial Use

1. Before using the device, remove all packaging materials and any labels that may be
on the device and are used for protection during transportation or for advertising.
Never remove the rating plate and any possible warnings!
2. Attach the wall bracket with charging station (2) (see the "Attaching Wall Bracket with
Charging Station" chapter).
3. Charge up the battery (14) (see the "Charging Up the Battery" chapter).

Attaching the Wall Bracket with Charging Station

PLEASE NOTE!
■ Use the fastening material supplied to hang up the wall bracket with charging station.
If you are unsure whether the fastening material supplied is suitable for the wall, seek
advice from a specialist stockist.
■ Hang the wall bracket with charging station in a secure and solid place.
■ Before drilling, ensure that there are no pipes or cables behind the intended drilling
point.
1. Drill holes at the correct distance into the wall and place dowels in them.
2. Screw the screws into the dowels. They should protrude by approx. 5 mm out of the
wall.
3. Hang the wall bracket with charging station (2) in the screws.
23
15 Ventilation slots
16 Filter holder with 2 motor fi lters
17 Dust container
18 Suction opening
EN
11
12
13
14
15