Attaching The Type Labels; Group Identification On The Type Label; Checking The Cooking Station At The Factory - Salvis VisionPro Série Notice De Montage

2.6

Attaching the type labels

Electrical
installation compart­
ment
To side wall in the base cabinet:
Type label(s)
In the gas installation compartment:
Type label(s)
Sign "Gas type"
2.6.1

Group identification on the type label

Type label
Group identification
Group 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
2.7

Checking the cooking station at the factory

. Check flatness of the top section and document (tolerance approx. 1 mm).
. Check gas installation modules when assembled, following the test instructions.
. Check electric installation modules when assembled, following the test instructions.
. Check for leaks:
− Water supply
− Water drain
. Check precise fit of the attachment parts:
− Cover panels for installation compartments
− Side panels
− Operating panels, etc.
Assambly instruction Cooking station
Specifications for assembly at the factory
Behind the front cover
panel on the distribu­
tion pipe:
Sign "Gas type"
Type labels in the electrical installation compart­
ment provide group information.
. Mark the respective group on the type label, as
D Example for type label for induction hob with two
Electrical installation modules
− On the installation module
− In the electrical installation compartment
(group identification see chapter 2.6.1!
− In the open base cabinet (for double-row
installation elements, attach in the open
base element on the corresponding side)
Gas installation modules
− On the installation module
− In the gas installation compartment
− In the open base cabinet (for double-row
installation elements, attach in the open
base element on the corresponding side)
D The sign "Gas notice" is supplied with the
product documentation (operating instruc­
tions).
shown in the example.
generators: One group for each generator. The­
refore, two groups are marked.
33 / 72