Parameters - Bodet Style 5S Hopital - NTP Notice D'installation Et De Mise En Service

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5.4 Parameters

This page is used to configure the clock display on the network.
The following information is displayed:
• Luminosity: Used to set clock brightness between 4 levels from 1 (low) to 4 (high).
Default brightness is 3.
• Mode 12H/24H: Used to display the time in 12- hour or 24-hour mode.
Example: 8:00 (in 12-hour mode) or 20:00 (in 24-hour mode).
• Eco Mode: Used to enable the clock's energy-saving mode. In Eco mode, the clock
displays the flashing colon and is set to minimum brightness (level 1). This mode is set for
a period configured below (ON & OFF Time). This mode is disabled if the user opens the
configuration menu (using the "S" and "+" keys) or changes the settings on the web server
or if the clock is rebooted.
• ON & OFF Time: Used to define the period when Eco mode is enabled. This mode is only
enabled when the status changes. Example: if Eco mode is set at 8:30 for 8:00 (day D),
the clock switches to this mode at 8:00 on the following day (D+1).
• Alternate Display: Used to select which information is displayed in alternation with the time
display. Time display can alternate with week number, date + month or the month + date.
is used to save any settings made on this page.
14
All manuals and user guides at all-guides.com
EN

Publicité

Table des Matières
loading

Table des Matières