Language Selection; Precautions During Commissioning And Operation; Control; Control Panel - Parker Hiross Antares ATT040 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 51
English

4.6 Language selection

Select USER SETTINGS
Press Enter to confi rm
Select Language
Press Enter to confi rm
Using UP
and DOWN
select the language.
Press Enter to confi rm

4.7 Precautions during commissioning and operation

!
During expansion, the air is expelled from the silencer:
- the unit is performing the step of "generating";
- risk of projection of material (small particles of dust, fragments...) and
noises.
Is required to perform the start-up wearing appropriate personal protec-
tive equipment(see table 1 para.1.4).
!
RISK CAUSED BY SUDDEN DEPRESSURIZATION!
Do not remove components of the dryer or perform other manipulations
when the system is under pressure.
Before performing any work on the dryer depressurize the system.
!
DO NOT CHANGE THE DEFAULT OF ELECTRONIC CONTROL
CARD.
5

Control

- - -Main Menu - - -

5.1 Control panel

START/STOP
USER SETTINGS
5.1.1 Display
SERVICE
INFORMATION
- User Settings Menu -
DRYER SETTINGS
DATE/TIME
BMS
MOISTURE DRAIN
OTHER
LANGUAGE
LANGUAGE SELECTION
5.1.2 Keys
English
KEY
UP
DOWN
ENTER
PRG
ESC
ALARM
5.1.3 Isolator switch
ATT040
PHOTO FUNCTION
Shifts the cursor or increases the value
of a parameter
Shifts the cursor or decreases the value
of a parameter
Shifts the cursor from the parameter to
another or confi rm a parameter
Enables access to the menu for select-
ing the group of parameter
Cancel an operation
Shows alarms on the display, switches
off the buzzer (if activated) and reset
alarms.
ON

5.2 Operating states

With the ISOLATOR switch in ON you give the electrical power no the
unit.
!
the unit is powered up until the isolator switch in the "OFF" position.
Y
Do not start the compressor for more than 10 times.

5.3 Screens displayed

5.3.1 Main Screen
Unit Status
OFF: Off
ON: On
OF RMT: Off by remote contact
OF CMP: Off by remote contact
Shows
Alarm code
Shows bypass (operating only with Winter /
Summer enabled)
Bypass close
Bypass open
4 / 12
Temperature of
Dew point
or
Temperature
Inlet Absorber
(operating in sum-
mer)
Level indicator
of Dewpoint
temperature
Date / hour

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Antares att060Antares att090Antares att140Antares att340

Table des Matières