Subtracting Readings; Continuous Measurement - TOOLCRAFT 1433978 Mode D'emploi

13. Subtracting readings

1. Measure the first value.
2. Push the button - (D). The just measured value will be moved to the
upper line of the display.
3. Measure the second value. The second reading will be moved to
the upper line of the display. The lower line shows the difference
between both readings.
4. Follow the steps described above to subtract further measurements.

14. Continuous measurement

1. Push and hold the button MEAS (C) for approx. two seconds
to switch to continuous measurement mode. The continuous
measurement indicator (7) appears at the upper part of the display.
2. The targeting laser (A) is activated. The distance is measured
continuously.
39