Assembly - Pelgrim OKW953VANS Notice D'utilisation

Assembly

Left- or right-hinged oven door
Remove the protective frame by removing
screws 1 and 2 (see fig. 8). Remove the
frame and replace screws.
Remove the upper hinge by removing the
two screws. Lift the door from the lower
hinge (see fig. 8a).
Re-fasten the hinge to the door.
Turn the door around so that the handle is
on the other side.
1
2
fig. 8a
Remove the hinge that is now at the top
(see fig. 8b). Attention: the ring belongs in
the lower hinge.
Slide the door into the lower hinge. Place
fig. 8
the ring between the hinge and the hinge
holder (see fig. 8c).
Now reassemble the upper hinge.
Assemble the protective frame on the other
side of the oven.
Unscrew the catch pin of the door lock and
move it to the other side.
fig. 8b
fig. 8c