Angelo Po B151HU Manuel D'utilisation page 54

POSITIONING
The appliance must be installed and tested in full compliance with accident-prevention
regulations contained in national law and current guidelines.
Installers are to comply with any current local regulations.
– Place the appliance onto the required working site.
– Avoid locations with exposure to direct sunlight.
– Do not place the appliance in hot, poorly-ventilated
rooms.
– Leave a min. 3.94" clearance around the appliance on
the sides where air inlet and outlet are located.
Important
The appliance must be connected to FX ovens by
following the instructions in the instruction sheet supplied with KIT BE1+FX
LEVELLING
Level the appliance by means of adjustable feet.
Important
If the appliance is not properly levelled the perform-
ance and condensate drain may be hampered.
IT
US
MAX ROOM TEMPERATURE
DE
Air-condenser units should not operate if room temperature is over 100°F. Above 89°F
maximum output is not guaranteed.
CAN
Model
ES
B151MU - B152MU - B151HU
B1101SU
WIRING
An omnipolar switch is to be installed before the appliance,
in compliance with the current regulations applied in the
country where the appliance is installed.
English
Air q.ty
[cfm]
650
2060
- 52 - Use and installation manual